Zoekresultaten voor: ‘mini usb female to usb c male’

Be prepared for virtually any PC component available and make Light Base 600 LX White with ARGB fans your creative show case.

Fully windowed front and side panel for a stunning panoramic view on all your PC components
Impressive illumination from every angle with a massive ARGB LED strip
4 Light Wings LX 120mm PWM fans for high airflow and quiet operation
Can be switched to inverted or horizontal layout in literal seconds thanks to intuitive handling
Spacious design for up to two 360mm radiators at the same time and an ATX motherboard
Support for motherboards with backside connector design

Shadow Base 800 DX Black is an airflow-optimized midi-tower with ARGB LEDs at the front that offers silent operation with enough space for extensive components such as graphics cards, 420mm radiators or E-ATX motherboards.

Exceptionally high airflow thanks to an open mesh design
3 Pure Wings 3 140mm PWM fans offer high airflow with quiet operation
Spacious design offers enough room for even the largest components
Subtle ARGB illumination with integrated ARGB controller
Simple and tool-less HDD and SSD installation
Easy to use cable bar for a tidy look
Tinted and tempered glass side window allows a superb view

Single-piece curved glass front and side panel
InfiniRail™ Fan Mounting System for easier building
Dual 360mm radiator support
3x RS-R ARGB 120mm reverse-rotor fans
Easy motherboard RGB control with bundled ARGB PWM fans
GPU Anti-sag Stabilization Arm
Compatible with reverse connector motherboards

The H7 Flow RGB revolutionizes GPU cooling in a classic mid-tower form factor. Its vertical PSU layout allows space for 3 x 120mm bottom fans, offering efficient cooling without expanding the case footprint.

Supports three bottom-mounted 120mm fans for direct GPU cooling while retaining a narrow mid-tower footprint.
Comes equipped with a F360 RGB Core single-frame fan for exceptional out-of-the-box cooling and RGB lighting.
High-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dust.
Supports up to 420mm radiators in the front and 360mm radiators in the top for powerful cooling potential.
Intuitive cable management system with wide channels, built-in hooks, and included straps for easy routing.
Capacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rear.
Conveniently access 2 x USB-A and 1 x USB-C ports located on the top panel.
Tool-less access to the front, top, and side panels makes building and upgrading a breeze.

The H7 Flow RGB revolutionizes GPU cooling in a classic mid-tower form factor. Its vertical PSU layout allows space for 3 x 120mm bottom fans, offering efficient cooling without expanding the case footprint.

Supports three bottom-mounted 120mm fans for direct GPU cooling while retaining a narrow mid-tower footprint.
Comes equipped with a F360 RGB Core single-frame fan for exceptional out-of-the-box cooling and RGB lighting.
High-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dust.
Supports up to 420mm radiators in the front and 360mm radiators in the top for powerful cooling potential.
Intuitive cable management system with wide channels, built-in hooks, and included straps for easy routing.
Capacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rear.
Conveniently access 2 x USB-A and 1 x USB-C ports located on the top panel.
Tool-less access to the front, top, and side panels makes building and upgrading a breeze.

The CORSAIR iCUE 5000X RGB QL Edition Mid-Tower Case includes four pre-installed QL120 RGB fans and an iCUE Lighting Node CORE, in a stunning all-white 5000X RGB case.

Wraparound glass view with removable front and side panels
Three pre-installed RS120-R ARGB fans
Builder-friendly features for a high-performance custom PC
Side, roof, and PSU fan mounting points for great cooling
Compatible with reverse connection motherboards

The CORSAIR FRAME 5000D RS ARGB is a modular and spacious mid-tower PC case featuring InfiniRail™ Fan Mounting System, RapidRoute 2.0 cable management, and is compatible with reverse connector motherboards.

Includes
Fully-modular design for next-level customization
4x RS140 ARGB Fans with daisy-chain connections
InfiniRail Fan Mounting System for easier building
Triple 360mm radiator support
GPU anti-sag stabilization arm
Compatible with reverse connector motherboards
RapidRoute 2.0 pegboard motherboard tray and cable looms

The CORSAIR FRAME 5000D RS ARGB is a modular and spacious mid-tower PC case featuring InfiniRail™ Fan Mounting System, RapidRoute 2.0 cable management, and is compatible with reverse connector motherboards.

Includes
Fully-modular design for next-level customization
4x RS140 ARGB Fans with daisy-chain connections
InfiniRail Fan Mounting System for easier building
Triple 360mm radiator support
GPU anti-sag stabilization arm
Compatible with reverse connector motherboards
RapidRoute 2.0 pegboard motherboard tray and cable looms

The CORSAIR FRAME 4000D RS ARGB is a fully-modular and spacious mid-tower PC case featuring InfiniRail™ Fan Mounting System and compatible with reverse connector motherboards.

Includes
Fully-modular design for next-level customization
InfiniRail™ Fan Mounting System for easier building
Includes three RS120 ARGB performance fans
Dual 360mm radiator support
GPU anti-sag stabilization arm
Compatible with reverse connector motherboards

The CORSAIR FRAME 4000D RS ARGB is a fully-modular and spacious mid-tower PC case featuring InfiniRail™ Fan Mounting System and compatible with reverse connector motherboards.

Includes
Fully-modular design for next-level customization
InfiniRail™ Fan Mounting System for easier building
Includes three RS120 ARGB performance fans
Dual 360mm radiator support
GPU anti-sag stabilization arm
Compatible with reverse connector motherboards

Wraparound glass view with removable front and side panels
Three pre-installed RS120-R ARGB fans
Builder-friendly features for a high-performance custom PC
Side, roof, and PSU fan mounting points for great cooling
Compatible with reverse connection motherboards

De Bytesatwork AMD PC, voor iedereen die naast gaming graag een performante pc heeft die zonder moeite de meest veelzijdige taken aan kan.

Met de launch van AMD Ryzen heeft Intel flinke concurrentie gekregen, op het gebied van multicore taken .

Hier weet AMD Ryzen vaak Intel voorbij te steken op het gebied van multi-tasking.

Onze pc's worden zwaar getest op stabiliteit en oververhitting, voor de pc naar onze klanten vertrekken zijn de pc's getest met Furmark, Futuremark, OCCT, en vele andere BURN in Tests. Geheugen wordt getest op fouten !*

Bios van het moederbord wordt tevens altijd bijgewerkt naar de laatste stabiele versie.

Overclocken van het systeem is ook een mogelijkheid, vraag er naar na uw bestelling.

Build to order systemen komen standaard met 2 jaar werkuren garantie, en 3 jaar hardware garantie !

Al onze systemen kunnen naar eigen smaak aangepast worden, zijn er andere onderdelen die u wenst ipv aanbevolen onderdelen, laat dit ons weten via mail!

* indien gekozen voor assemblage en installatie os

AIR 5400 RS-R ARGB Triple Chamber Mid-Tower PC Case - White
Triple-chamber design for peak thermal performance
Dedicated chamber for CPU cooling
Dual airflow ducts for powerful main chamber airflow
Dual curved glass French door panels
Compatible with reverse connector motherboards
RapidRoute 2.0 cable management system
3x RS-R 120mm reverse PWM ARGB fans

Single-piece curved glass front and side panel
InfiniRail™ Fan Mounting System for easier building
Dual 360mm radiator support
3x iCUE LINK LX-R RGB 120mm reverse-rotor fans
GPU Anti-sag Stabilization Arm
Compatible with reverse connector motherboards
iCUE LINK System Hub included for full digital control of connected devices

Single-piece curved glass front and side panel
InfiniRail™ Fan Mounting System for easier building
Dual 360mm radiator support
3x iCUE LINK LX-R RGB 120mm reverse-rotor fans
GPU Anti-sag Stabilization Arm
Compatible with reverse connector motherboards
iCUE LINK System Hub included for full digital control of connected devices

With new hardware releases demanding more cooling capacity and internal space, the XT-series are designed to deliver just that. And it delivers extremely good value. The length and width of the chassis easily fit even the largest graphics cards with space to spare for cable management. Cooling has been optimized with up to 9x 120 mm fan locations, support for 140 mm fans and dedicated radiator space in the top of the chassis.