Zoekresultaten voor: ‘stille Be Quiet! Pure Base 500DX 14cm fans RGB GLAS’

The CORSAIR iCUE LINK 2500X RGB Mid-Tower Dual Chamber PC Case organized view of your SFF PC through dual tempered glass panels, with two pre-installed RX120 RGB fans.
Dual chambers for a streamlined look
iCUE LINK Fan Bundle included (2x RX RGB Fans & System Hub)
Compatible with reverse connector mATX & mITX motherboards
Lots of customization options
Showcase glass panels

The CORSAIR iCUE LINK 2500X RGB Mid-Tower Dual Chamber PC Case organized view of your SFF PC through dual tempered glass panels, with two pre-installed RX120 RGB fans.
Dual chambers for a streamlined look
iCUE LINK Fan Bundle included (2x RX RGB Fans & System Hub)
Compatible with reverse connector mATX & mITX motherboards
Lots of customization options
Showcase glass panels

Met een front- en zijpaneel van gehard glas legt de Rebel C60 RGB de focus op de hardware die binnenin is geïnstalleerd. Vier RGB-fans zijn slim geplaatst rondom de locaties voor het moederbord, geheugen, koeling en grafische kaart en zorgen voor efficiënte koeling, waarbij er ook lucht vanaf de onderkant van de behuizing naar binnen wordt gezogen. De ATX-kast is uitgerust met een bevestigingsframe en bevestigingsbeugel voor het eenvoudig plaatsen van harde schijven, SDD's en meer fans. Daarnaast zorgen moderne I/O-poorten voor uitgebreide verbindingsmogelijkheden.

Met een front- en zijpaneel van gehard glas legt de Rebel C60 RGB de focus op de hardware die binnenin is geïnstalleerd. Vier RGB-fans zijn slim geplaatst rondom de locaties voor het moederbord, geheugen, koeling en grafische kaart en zorgen voor efficiënte koeling, waarbij er ook lucht vanaf de onderkant van de behuizing naar binnen wordt gezogen. De ATX-kast is uitgerust met een bevestigingsframe en bevestigingsbeugel voor het eenvoudig plaatsen van harde schijven, SDD's en meer fans. Daarnaast zorgen moderne I/O-poorten voor uitgebreide verbindingsmogelijkheden.

The CORSAIR 3000D RGB AIRFLOW presents a mid-tower ATX chassis with an efficient high-airflow design, including three pre-fitted CORSAIR AR120 RGB fans that deliver outstanding cooling and vibrant lighting effects.

Fits up to 8x 120mm fans and up to 360mm radiators
Includes 3x AR120 RGB fans
High-performance airflow optimized front panel
Fits four-slot graphics cards up to 360mm in length

Met zijn elegante houten ontwerp op het frontpaneel en het schroefloze zijpaneel van gehard glas zorgt de Rebel C70G RGB voor een stijlvol tintje in elke game-, woon- of studeerkamer. Naast zijn opvallende uiterlijk, bieden modulaire installatieopties ruimte voor maximaal elf fans van 120 mm of twee radiators. En dankzij de geperforeerde oppervlakken in en rondom de behuizing zijn zelfs bij geavanceerde configuraties optimale koelprestaties gegarandeerd. Daarnaast wordt de blijvende efficiëntie van de PC-behuizing ondersteund door zijn toekomstbestendige USB-C- en TRRS-aansluitingen.

The H5 Flow RGB boosts airflow and GPU cooling with its perforated PSU shroud, mesh panels, and large radiator support—all in a compact mid-tower form factor.

The PSU shroud is perforated on the side and bottom, enabling optimal air intake from two 120mm fans (not included).
Supports up to a 360mm radiator in front and a 240mm radiator up top for powerful liquid cooling potential.
Ultra-fine mesh on the top, front, and side panels creates maximum airflow and filters dust.
Equipped with a front-mounted F360 RGB Core (CV) single-frame fan and rear-mounted F120Q (CV) fan for strong out-of-the-box cooling and lighting.
Effortlessly route and conceal cables using the wide channels, hooks, and straps.

The H5 Flow RGB boosts airflow and GPU cooling with its perforated PSU shroud, mesh panels, and large radiator support—all in a compact mid-tower form factor.

The PSU shroud is perforated on the side and bottom, enabling optimal air intake from two 120mm fans (not included).
Supports up to a 360mm radiator in front and a 240mm radiator up top for powerful liquid cooling potential.
Ultra-fine mesh on the top, front, and side panels creates maximum airflow and filters dust.
Equipped with a front-mounted F360 RGB Core (CV) single-frame fan and rear-mounted F120Q (CV) fan for strong out-of-the-box cooling and lighting.
Effortlessly route and conceal cables using the wide channels, hooks, and straps.

The CORSAIR 3000D RGB AIRFLOW presents a mid-tower ATX chassis with an efficient high-airflow design, including three pre-fitted CORSAIR AR120 RGB fans that deliver outstanding cooling and vibrant lighting effects.

Fits up to 8x 120mm fans and up to 360mm radiators
Includes 3x AR120 RGB fans
High-performance airflow optimized front panel
Fits four-slot graphics cards up to 360mm in length

Mid-tower chassis configurable for air cooling and water cooling
• Airflow optimized front, top and PSU shroud side mesh panels
• Equipped with 2 x front 160 PWM fans (ARGB or non-RGB) and 1 x rear 140mm PWM fan
• Supports 360 radiator at the top, front and a maximum of 10 fans
• Includes rear PCIe fan bracket
• Front I/O that can be relocated to the bottom
• Extensive cable management solution

Mid-tower chassis configurable for air cooling and water cooling
• Airflow optimized front, top and PSU shroud side mesh panels
• Equipped with 2 x front 160 PWM fans (ARGB or non-RGB) and 1 x rear 140mm PWM fan
• Supports 360 radiator at the top, front and a maximum of 10 fans
• Includes rear PCIe fan bracket
• Front I/O that can be relocated to the bottom
• Extensive cable management solution

The H7 Flow RGB revolutionizes GPU cooling in a classic mid-tower form factor. Its vertical PSU layout allows space for 3 x 120mm bottom fans, offering efficient cooling without expanding the case footprint.

Supports three bottom-mounted 120mm fans for direct GPU cooling while retaining a narrow mid-tower footprint.
Comes equipped with a F360 RGB Core single-frame fan for exceptional out-of-the-box cooling and RGB lighting.
High-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dust.
Supports up to 420mm radiators in the front and 360mm radiators in the top for powerful cooling potential.
Intuitive cable management system with wide channels, built-in hooks, and included straps for easy routing.
Capacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rear.
Conveniently access 2 x USB-A and 1 x USB-C ports located on the top panel.
Tool-less access to the front, top, and side panels makes building and upgrading a breeze.

The H7 Flow RGB revolutionizes GPU cooling in a classic mid-tower form factor. Its vertical PSU layout allows space for 3 x 120mm bottom fans, offering efficient cooling without expanding the case footprint.

Supports three bottom-mounted 120mm fans for direct GPU cooling while retaining a narrow mid-tower footprint.
Comes equipped with a F360 RGB Core single-frame fan for exceptional out-of-the-box cooling and RGB lighting.
High-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dust.
Supports up to 420mm radiators in the front and 360mm radiators in the top for powerful cooling potential.
Intuitive cable management system with wide channels, built-in hooks, and included straps for easy routing.
Capacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rear.
Conveniently access 2 x USB-A and 1 x USB-C ports located on the top panel.
Tool-less access to the front, top, and side panels makes building and upgrading a breeze.

The CORSAIR iCUE 5000X RGB QL Edition Mid-Tower Case includes four pre-installed QL120 RGB fans and an iCUE Lighting Node CORE, in a stunning all-white 5000X RGB case.