Zoekresultaten voor: ‘tower of succubus table fearless’

Think Big. Build Small.
O11D MINI adding to the O11 Dynamic series, the classic and mordern looking. A case that would accommodate the maximum number of water-cooling configurations without being oversized. With a modular back panel design, the user has the option to choose from 3 slots/ 5 slots/ 7 slots I/O shield to optimize the case to the configuration of user’s choice. Supports mini-ITX, micro-ATX, ATX, and E-ATX motherboard sizes. and up to 9 fans to cool the chassis.

• • Unique, honeycomb patterned mesh front creates a striking effect and provides access to fan-powered cooling
• • Vividly colored motherboard plate, drive trays and exterior accents (Pop Air RGB TG Cyan/Magenta/Green/Orange Core)
• • Comes with three of our 120 mm Aspect 12 RGB (RGB versions) or Aspect 12 fans (Non-RGB versions)

• • Open grille and unblocked internal layout
• • Comes with RGB PWM fans and three 140 mm fans
• • Front fan brackets cater to standard radiator and fan sizes

• • Iconisch mesh-ontwerp zorgt voor gefilterde luchtstroom met een gedurfde, onopvallende look
• • Ruim en uitgebreid aanpasbaar interieur met dubbele indeling
• • Geschikt voor grote moederborden tot en met E-ATX en SSI-EEB
• Open Layout ondersteunt radiatoren tot 480/420 mm (voorkant), 480/420 mm (bovenkant) en 280/240 mm (basis)

UITSTEKENDE VEELZIJDIGHEID, PRESTATIES EN STILTE

be Quiet! Silent Base 802 Window Black is de perfecte oplossing voor geavanceerde gebruikers die streven naar een fluisterstille werking en maximale prestaties.

• Verwisselbare bovenklep en frontpaneel voor maximale luchtstroom of stille werking
• Drie Pure Wings 2 140 mm-ventilatoren
• Extra dikke isolatiematten voor verbeterde geluidsreductie
• State-of-the-art I / O-paneel met ventilatorcontroller en USB 3.2 Gen. 2 Type C
• Ontkoppelde moederbordlade kan worden verplaatst voor een omgekeerde lay-out
• Afneembare bovenbeugel zorgt voor eenvoudige installatie van radiatoren en ventilatoren
• Klaar voor radiatoren tot 420 mm
• Zijruiten van getint en gehard glas bieden een prachtig uitzicht

Light Base 500 LX Black stands for a clean design and the core values of gaming: performance, accessibility and functionality.

Angled slide-out fan frame on the side routes air directly to the GPU
Fans can be installed in the lowered fan bay to line up perfectly with the case floor
4 preinstalled Light Wings LX 120mm PWM fans for extraordinary airflow and impressive illumination
ARGB controller button and ARGB fan hub
Spacious design for radiators up to 360mm, and ATX motherboards
2 possible PSU positions enable backside connector motherboards
Dust filters in the side and the bottom

Triple-chamber design for peak thermal performance
Dedicated chamber for CPU cooling
Dual airflow ducts for powerful main chamber airflow
Dual curved glass French door panels
Compatible with reverse connector motherboards
RapidRoute 2.0 cable management system
3x iCUE LINK LX-R RGB 120mm reverse-rotor fans and System Hub

Triple-chamber design for peak thermal performance
Dedicated chamber for CPU cooling
Dual airflow ducts for powerful main chamber airflow
Dual curved glass French door panels
Compatible with reverse connector motherboards
RapidRoute 2.0 cable management system
3x iCUE LINK LX-R RGB 120mm reverse-rotor fans and System Hub

Let op: deze behuizing is enkel geschikt voor moederborden met de aansluitingen aan de achterkant!

North XL combines a transformative take on the gaming PC case with a generous form factor. It fuses design materials with airflow engineering, to make performance gaming a stylish addition to the living space. Inside, it boasts a spacious, flexible, and intuitive interior layout so you can make the most of your building and gaming experience. The North XL RC version offers compatibility with reverse connector motherboards for an even cleaner finish.

Let op: deze behuizing is enkel geschikt voor moederborden met de aansluitingen aan de achterkant!

North XL combines a transformative take on the gaming PC case with a generous form factor. It fuses design materials with airflow engineering, to make performance gaming a stylish addition to the living space. Inside, it boasts a spacious, flexible, and intuitive interior layout so you can make the most of your building and gaming experience. The North XL RC version offers compatibility with reverse connector motherboards for an even cleaner finish.

Be prepared for virtually any PC component available and make Light Base 600 LX Black with ARGB fans your creative show case.

Fully windowed front and side panel for a stunning panoramic view on all your PC components
Impressive illumination from every angle with a massive ARGB LED strip
4 Light Wings LX 120mm PWM fans for high airflow and quiet operation
Can be switched to inverted or horizontal layout in literal seconds thanks to intuitive handling
Spacious design for up to two 360mm radiators at the same time and an ATX motherboard
Support for motherboards with backside connector design

With new hardware releases demanding more cooling capacity and internal space, the XT-series are designed to deliver just that. And it delivers extremely good value. The length and width of the chassis easily fit even the largest graphics cards with space to spare for cable management. Cooling has been optimized with up to 10x 120 mm fan locations, support for 140 mm fans and dedicated radiator space in the top of the chassis.

The XT-Series further innovates to bring support for the latest mainboards that host hidden connectors at the rear to unlock that zero-cable setup. The graphics card also benefits from 3x 120 mm fan locations on the mid-plate that provides direct cooling.

Shadow Base 800 FX Black is an airflow-optimized midi-tower that offers impressive ARGB illumination and provides enough space for extensive components such as huge graphics cards and E-ATX motherboards.

ARGB lighting with ARGB controller for maximum illumination options
Multiple colors and modes for an individual look
4 Light Wings 140mm PWM fans for high airflow and quiet operation
Exceptionally high airflow thanks to an open mesh design
Spacious design offers room for largest components
PWM and ARGB hub included
Simple and tool-less HDD and SSD installation
Tinted and tempered glass side window allows a superb view

• • Open grille and 180 mm front fans optimized for maximum air intake
• • Fractal Design Dynamic PWM / Prisma ARGB PWM 180 x 38 mm fans leverage power, size, and thickness for massive air-moving capacity
• • Expansive base intakes and extra-large bottom fan support offers exceptional GPU cooling potential (with bottom PCI slot free)

The Define 7 Nano re-defines precision, bringing clean design and a host of features from its larger siblings to a minimized form factor. The compact yet spacious interior can accommodate all Mini ITX and Mini-DTX motherboards, and the option to house a GPU up to 306 mm, making it highly versatile.

Small tower with big airflow, the O11 AIR MINI provides modular design for ATX, M-ATX or ITX motherboards. Being all about the air, O11 AIR MINI has a spacious interior to accommodate multiple confirgurations of fan and radiator setups to maximize the airflow.

Small tower with big airflow, the O11 AIR MINI provides modular design for ATX, M-ATX or ITX motherboards. Being all about the air, O11 AIR MINI has a spacious interior to accommodate multiple confirgurations of fan and radiator setups to maximize the airflow.

Think Big. Build Small.
O11D MINI adding to the O11 Dynamic series, the classic and mordern looking. A case that would accommodate the maximum number of water-cooling configurations without being oversized. With a modular back panel design, the user has the option to choose from 3 slots/ 5 slots/ 7 slots I/O shield to optimize the case to the configuration of user’s choice. Supports mini-ITX, micro-ATX, ATX, and E-ATX motherboard sizes. and up to 9 fans to cool the chassis.