Hardware

Hoogwaardige PCI-e geluidskaart voor gaming en entertainment en DAC

The H5 Flow boosts airflow and GPU cooling with its perforated PSU shroud, mesh panels, and large radiator support—all in a compact mid-tower form factor.

The PSU shroud is perforated on the side and bottom, enabling optimal air intake from two 120mm fans (not included).
Supports up to a 360mm radiator in front and a 240mm radiator up top for powerful liquid cooling potential.
Ultra-fine mesh on the top, front, and side panels creates maximum airflow and filters dust.
Equipped with two 120mm Quiet Airflow fans (CV) —one in front, one in rear—for solid out-of-the-box performance.
Effortlessly route and conceal cables using the wide channels, hooks, and straps.

De voeding is geopend maar compleet en ongebruikt.

Fan EZ-Chain: DIY-friendly fan design with slide-in interlocking mechanism and DAISY-CHAIN.
330-degree Rotatable water block design.
New fan blade design increases both airflow and pressure, while reducing noise.
The ARGB fan lighting can be synchronized with other devices.
Universal design for fan and pump RPM control, compatible with all motherboard brands.

• • Unique, honeycomb patterned mesh front creates a striking effect and provides access to fan-powered cooling
• • Vividly colored motherboard plate, drive trays and exterior accents (Pop Air RGB TG Cyan/Magenta/Green/Orange Core)
• • Comes with three of our 120 mm Aspect 12 RGB (RGB versions) or Aspect 12 fans (Non-RGB versions)

Met een chique bekleding van stof onder het geharde glas van de zij- en voorkant, geeft de AK7 ARGB je gaminghardware een speciaal vleugje elegantie. En dankzij vier voorgeïnstalleerde ARGB-fans en een speciale zijpaneel-luchtinlaat, ziet de behuizing er niet alleen goed uit, maar zorgt hij ook altijd voor een opwindende airflow. De ATX-behuizing biedt ook moderne aansluitingen, een brede compatibiliteit met BTF-moederborden en veel ruimte voor krachtige hardware.

Met een chique bekleding van stof onder het geharde glas van de zij- en voorkant, geeft de AK7 ARGB je gaminghardware een speciaal vleugje elegantie. En dankzij vier voorgeïnstalleerde ARGB-fans en een speciale zijpaneel-luchtinlaat, ziet de behuizing er niet alleen goed uit, maar zorgt hij ook altijd voor een opwindende airflow. De ATX-behuizing biedt ook moderne aansluitingen, een brede compatibiliteit met BTF-moederborden en veel ruimte voor krachtige hardware.

With new hardware releases demanding more cooling capacity and internal space, the XT-series are designed to deliver just that. And it delivers extremely good value. The length and width of the chassis easily fit even the largest graphics cards with space to spare for cable management. Cooling has been optimized with up to 9x 120 mm fan locations, support for 140 mm fans and dedicated radiator space in the top of the chassis.

Pure Base 501 Airflow Window Black is a traditional, timeless and versatile be quiet! ATX case with compact dimensions.

High airflow intake front panel and top cover for maximum performance
2 preinstalled Pure Wings 3 140mm PWM fans for extraordinary air pressure
Generous space for high-end graphics cards and large coolers, despite compact footprint
Optional vertical graphics card installation
Water cooling ready for radiators up to 360mm
USB 3.2 Gen. 2 Type C for best connectivity
Comfortable cable management with clever cable routing design
Side panel made of tempered glass

The CORSAIR 3500X Mid-Tower Glass PC Case combines builder-friendly features with a stunning wraparound glass aesthetic and the cooling potential you need for an amazing PC.

Wraparound glass view with removable front and side panels
Builder-friendly features for a high-performance custom PC
Side, roof, and PSU fan mounting points for great cooling
Compatible with ASUS BTF and MSI Project Zero reverse connection motherboards

The CORSAIR 3500X Mid-Tower Glass PC Case combines builder-friendly features with a stunning wraparound glass aesthetic and the cooling potential you need for an amazing PC.

Wraparound glass view with removable front and side panels
Builder-friendly features for a high-performance custom PC
Side, roof, and PSU fan mounting points for great cooling
Compatible with ASUS BTF and MSI Project Zero reverse connection motherboards

iCUE LINK RX120 120mm PWM Fan Triple Starter Kit
CORSAIR RX120 PWM fans push through obstructions using high static pressure and PWM controlled speeds, built with premium Liquid Crystal Polymer and CORSAIR AirGuide technology.
Advanced performance blade shape
iCUE LINK System Hub included
Glass fiber-reinforced LCP fan blades
AirGuide technology for concentrated cooling
Magnetic dome bearing for minimal noise

Maximize your cooling efficiency with the CORSAIR RS120 MAX PWM Thick Fans Triple Pack, boasting 3x 30mm-thick fans for very high static pressure with premium liquid crystal polymer construction.
5mm Thicker than standard fans for greater cooling performance
PWM-controlled speeds up to 2,000 RPM
Premium Liquid Crystal Polymer construction
AirGuide technology for concentrated cooling
Magnetic dome bearing for minimal noise

Intel® Socket LGA 1700：Support 13th and 12th Gen Series Processors
Unparalleled Performance：Hybrid 6+1+1 Phases Digital VRM Solution
Dual Channel DDR4：2*DIMMs XMP Memory Module Support
Next Generation Storage：2*PCIe 4.0 x4 M.2 Connectors
EZ-Latch：PCIe 4.0x16 Slot with Quick Release Design
Fast Networks：GbE LAN
Extended Connectivity：HDMI, D-Sub
Smart Fan 6：Features Multiple Temperature Sensors, Hybrid Fan Headers with FAN STOP

• • Unique, honeycomb patterned mesh front creates a striking effect and provides access to fan-powered cooling
• • Vividly colored motherboard plate, drive trays and exterior accents (Pop Air RGB TG Cyan/Magenta/Green/Orange Core)
• • Comes with three of our 120 mm Aspect 12 RGB (RGB versions) or Aspect 12 fans (Non-RGB versions)

Pure Loop 3 LX 360mm boasts vibrant lighting, stunning customization options and an extremely high cooling performance.

Stylish ARGB cooling block featuring 10 included lighting foils for extensive illumination options and breathtaking visual effects
Incomparable options for individualization
3 Light Wings LX PWM high-speed fans with funnel-shaped air outlets for colorful and vibrant cooling
Daisy-chained PWM fans for maximum convenience
Impressively high cooling performance for all consumer CPUs
State-of-the-art PWM pump with 6-pole motor reduces vibrations to an absolute minimum
Easy-to-access refill port for convenient handling
Unique design language
3-year manufacturer’s warranty
Product conception, design and quality control in Germany

The next generation of airflow cases from DeepCool has arrived, and they are indeed glorious. The CH360 DIGITAL is a newly designed mATX case with a concentrated focus on increased airflow throughout the entire chassis. Two bright PWM enabled 140mm ARGB fans are mounted in front of the main compartment, a hybrid side panel, and a dual status digital screen sets the CH360 DIGITAL apart from the competition.

• • Excellent noise reduction thanks to a closed front, a closed top, bitumen side panels and sound-damping foam
• • Comes with three of our 120 mm Aspect fans
• • Features two ultra-versatile storage trays, each supporting a 3.5" and a 2.5" drive simultaneously

• • Accommodates mATX / Mini ITX Motherboards
• • Excellent noise reduction thanks to the closed front and top, bitumen side panels and sound-damping foam
• • Up to two HDDs and six SSDs (or one HDD and five SSDs with one optical bay in use)