Behuizingen

The H5 Flow RGB boosts airflow and GPU cooling with its perforated PSU shroud, mesh panels, and large radiator support—all in a compact mid-tower form factor.

The PSU shroud is perforated on the side and bottom, enabling optimal air intake from two 120mm fans (not included).
Supports up to a 360mm radiator in front and a 240mm radiator up top for powerful liquid cooling potential.
Ultra-fine mesh on the top, front, and side panels creates maximum airflow and filters dust.
Equipped with a front-mounted F360 RGB Core (CV) single-frame fan and rear-mounted F120Q (CV) fan for strong out-of-the-box cooling and lighting.
Effortlessly route and conceal cables using the wide channels, hooks, and straps.

• • Accommodates E-ATX (up to 280 mm) / ATX / mATX / Mini ITX Motherboards
• • Easily mounted tempered glass side panel lets you showcase your components
• • Up to four HDDs and six SSDs (or three HDDs and five SSDs with one optical bay in use)

Mid-tower chassis configurable for air cooling and water cooling
• Airflow optimized front, top and PSU shroud side mesh panels
• Equipped with 2 x front 160 PWM fans (ARGB or non-RGB) and 1 x rear 140mm PWM fan
• Supports 360 radiator at the top, front and a maximum of 10 fans
• Includes rear PCIe fan bracket
• Front I/O that can be relocated to the bottom
• Extensive cable management solution

Dankzij het slimme ruime ontwerp is de Rebel C20 ITX een Mini-ITX-behuizing die ruimte biedt aan zelfs de grootste moderne videokaarten en een 360mm-radiator. En omdat de kast zowel verticaal als horizontaal kan worden geplaatst, past hij elegant in elke omgeving, of het nu een kantoor of woonkamer is.

• • Iconic angular mesh design offers airflow with a bold, stealth-inspired aesthetic
• • Spacious interior easily accommodates large motherboards up to and including 285 mm E-ATX
• • Support for radiators up to 360 mm in front, 360 mm up top, or 280 mm in the base

Shadow Base 800 is an airflow-optimized full-tower that offers silent operation with enough space for extensive components such as graphics cards, 420mm radiators or E-ATX motherboards.

Exceptionally high airflow thanks to an open mesh design
3 Pure Wings 3 140mm PWM fans offer high airflow with quiet operation
Spacious design offers enough room for even the largest components
Simple and tool-less HDD and SSD installation
Rotatable PCIe slots enable vertical installation of GPUs
Easy to use cable bar for a neat and tidy look
Tinted and tempered glass side window allows a superb view
3-year manufacturer’s warranty

The H7 Flow revolutionizes GPU cooling in a classic mid-tower form factor. Its vertical PSU layout allows space for 3 x 120mm bottom fans, offering efficient cooling without expanding the case footprint.

Supports three bottom-mounted 120mm fans for direct GPU cooling while retaining a narrow mid-tower footprint.
Comes equipped with three front-mounted 120mm fans for exceptional out-of-the-box cooling.
High-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dust.
Supports up to 420mm radiators in the front and 360mm radiators in the top for powerful cooling potential.
Intuitive cable management system with wide channels, built-in hooks, and included straps for easy routing.
Capacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rear.
Conveniently access 2 x USB-A and 1 x USB-C ports located on the top panel.
Tool-less access to the front, top, and side panels makes building and upgrading a breeze.

Wraparound glass view with removable front and side panels
Three pre-installed RS120-R ARGB fans
Builder-friendly features for a high-performance custom PC
Side, roof, and PSU fan mounting points for great cooling
Compatible with reverse connection motherboards

Be prepared for virtually any PC component available and make Light Base 600 DX White your creative show case.

Fully windowed front and side panel for a stunning panoramic view on all your PC components
Impressive illumination from every angle with a massive ARGB LED strip
Can be switched to inverted or horizontal layout in literal seconds thanks to intuitive handling
Spacious design for up to two 360mm radiators at the same time and an ATX motherboard
Support for motherboards with backside connector design
2 ARGB and fan hubs with 12 connectors in total

Wraparound glass view with removable front and side panels
Three pre-installed RS120-R ARGB fans
Builder-friendly features for a high-performance custom PC
Side, roof, and PSU fan mounting points for great cooling
Compatible with reverse connection motherboards

Small tower with big airflow, the O11 AIR MINI provides modular design for ATX, M-ATX or ITX motherboards. Being all about the air, O11 AIR MINI has a spacious interior to accommodate multiple confirgurations of fan and radiator setups to maximize the airflow.

Pure Base 501 LX Black is an impressively versatile be quiet! ATX case with ARGB fans, compact dimensions and high airflow for any application.

High airflow intake front panel and top cover for maximum performance
4 preinstalled Light Wings LX PWM fans for unmistakable lighting effects and extraordinary air pressure
ARGB controller and ARGB-PWM hub for 6 fans
Generous space for high-end graphics cards and large coolers, despite compact footprint
Optional vertical graphics card installation
Water cooling ready for radiators up to 360mm
Comfortable cable management with clever cable routing design
Side panel made of tempered glass