Zoekresultaten voor: ‘Glass substrate with integrated adiabatic waveguide bends f’

The CORSAIR iCUE LINK 2500X RGB Mid-Tower Dual Chamber PC Case organized view of your SFF PC through dual tempered glass panels, with two pre-installed RX120 RGB fans.
Dual chambers for a streamlined look
iCUE LINK Fan Bundle included (2x RX RGB Fans & System Hub)
Compatible with reverse connector mATX & mITX motherboards
Lots of customization options
Showcase glass panels

The CORSAIR iCUE LINK 2500X RGB Mid-Tower Dual Chamber PC Case organized view of your SFF PC through dual tempered glass panels, with two pre-installed RX120 RGB fans.
Dual chambers for a streamlined look
iCUE LINK Fan Bundle included (2x RX RGB Fans & System Hub)
Compatible with reverse connector mATX & mITX motherboards
Lots of customization options
Showcase glass panels

The CORSAIR 3500X Mid-Tower Glass PC Case combines builder-friendly features with a stunning wraparound glass aesthetic and the cooling potential you need for an amazing PC.

Wraparound glass view with removable front and side panels
Builder-friendly features for a high-performance custom PC
Side, roof, and PSU fan mounting points for great cooling
Compatible with ASUS BTF and MSI Project Zero reverse connection motherboards

The CORSAIR 3500X Mid-Tower Glass PC Case combines builder-friendly features with a stunning wraparound glass aesthetic and the cooling potential you need for an amazing PC.

Wraparound glass view with removable front and side panels
Builder-friendly features for a high-performance custom PC
Side, roof, and PSU fan mounting points for great cooling
Compatible with ASUS BTF and MSI Project Zero reverse connection motherboards

ProArt PA602 E-ATX computerkast, 420 mm radiator ondersteuning, één 140 mm en twee 200 mm voorgeïnstalleerde systeemventilatoren, IR-stofindicator op frontpaneel, vergrendeling voor aan-/uitknop, gereedschapsloze PCIe-montage, USB 20Gbps ondersteuning

Shadow Base 800 is an airflow-optimized full-tower that offers silent operation with enough space for extensive components such as graphics cards, 420mm radiators or E-ATX motherboards.

Exceptionally high airflow thanks to an open mesh design
3 Pure Wings 3 140mm PWM fans offer high airflow with quiet operation
Spacious design offers enough room for even the largest components
Simple and tool-less HDD and SSD installation
Rotatable PCIe slots enable vertical installation of GPUs
Easy to use cable bar for a neat and tidy look
Tinted and tempered glass side window allows a superb view
3-year manufacturer’s warranty

Pop 2 Air offers airflow performance with a sleek, intuitive design. With mesh front and top panels, three included fans, a GPU air guide, and support for a 360 mm top radiator, Pop 2 Air helps keep modern gaming components running smoothly.

The H7 Flow revolutionizes GPU cooling in a classic mid-tower form factor. Its vertical PSU layout allows space for 3 x 120mm bottom fans, offering efficient cooling without expanding the case footprint.

Supports three bottom-mounted 120mm fans for direct GPU cooling while retaining a narrow mid-tower footprint.
Comes equipped with three front-mounted 120mm fans for exceptional out-of-the-box cooling.
High-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dust.
Supports up to 420mm radiators in the front and 360mm radiators in the top for powerful cooling potential.
Intuitive cable management system with wide channels, built-in hooks, and included straps for easy routing.
Capacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rear.
Conveniently access 2 x USB-A and 1 x USB-C ports located on the top panel.
Tool-less access to the front, top, and side panels makes building and upgrading a breeze.

The H7 Flow revolutionizes GPU cooling in a classic mid-tower form factor. Its vertical PSU layout allows space for 3 x 120mm bottom fans, offering efficient cooling without expanding the case footprint.

Supports three bottom-mounted 120mm fans for direct GPU cooling while retaining a narrow mid-tower footprint.
Comes equipped with three front-mounted 120mm fans for exceptional out-of-the-box cooling.
High-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dust.
Supports up to 420mm radiators in the front and 360mm radiators in the top for powerful cooling potential.
Intuitive cable management system with wide channels, built-in hooks, and included straps for easy routing.
Capacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rear.
Conveniently access 2 x USB-A and 1 x USB-C ports located on the top panel.
Tool-less access to the front, top, and side panels makes building and upgrading a breeze.

The H5 Flow boosts airflow and GPU cooling with its perforated PSU shroud, mesh panels, and large radiator support—all in a compact mid-tower form factor.

The PSU shroud is perforated on the side and bottom, enabling optimal air intake from two 120mm fans (not included).
Supports up to a 360mm radiator in front and a 240mm radiator up top for powerful liquid cooling potential.
Ultra-fine mesh on the top, front, and side panels creates maximum airflow and filters dust.
Equipped with two 120mm Quiet Airflow fans (CV) —one in front, one in rear—for solid out-of-the-box performance.
Effortlessly route and conceal cables using the wide channels, hooks, and straps.

The H5 Flow boosts airflow and GPU cooling with its perforated PSU shroud, mesh panels, and large radiator support—all in a compact mid-tower form factor.

The PSU shroud is perforated on the side and bottom, enabling optimal air intake from two 120mm fans (not included).
Supports up to a 360mm radiator in front and a 240mm radiator up top for powerful liquid cooling potential.
Ultra-fine mesh on the top, front, and side panels creates maximum airflow and filters dust.
Equipped with two 120mm Quiet Airflow fans (CV) —one in front, one in rear—for solid out-of-the-box performance.
Effortlessly route and conceal cables using the wide channels, hooks, and straps.

The CG580 4F is a picturesque single-chamber case crafted to elegantly display the most commonly used components. Equipped with 4 ARGB fans, support for 360mm radiators, and multiple fan configurations, it combines style with exceptional functionality. The design features a no A-pillar construction, along with glass side and front panels offering a 270°view, allowing builders to fully appreciate their hardware.