Behuizingen

With new hardware releases demanding more cooling capacity and internal space, the XT-series are designed to deliver just that. And it delivers extremely good value. The length and width of the chassis easily fit even the largest graphics cards with space to spare for cable management. Cooling has been optimized with up to 9x 120 mm fan locations, support for 140 mm fans and dedicated radiator space in the top of the chassis.

Pure Base 501 Airflow Window Black is a traditional, timeless and versatile be quiet! ATX case with compact dimensions.

High airflow intake front panel and top cover for maximum performance
2 preinstalled Pure Wings 3 140mm PWM fans for extraordinary air pressure
Generous space for high-end graphics cards and large coolers, despite compact footprint
Optional vertical graphics card installation
Water cooling ready for radiators up to 360mm
USB 3.2 Gen. 2 Type C for best connectivity
Comfortable cable management with clever cable routing design
Side panel made of tempered glass

De CA200G uit de ELITE SHARK-serie is een enorme ATX-full tower. Deze pc-behuizing valt op door zijn RGB-verlichting, state-of-the-artkenmerken en een gamingdesign gebaseerd op pure elegantie. De CA200G voldoet aan de behoeften van zowel hardwarehobbyisten als serieuze liefhebbers: er is meer dan genoeg ruimte voor fans en radiatoren, grafische kaarten kunnen zowel horizontaal als verticaal worden geïnstalleerd en ook een pomphouder voor waterkoeling past erin, maar toch is er nog steeds voldoende plaats voor grote high-end hardwarecomponenten.

Pure Base 501 DX Black is an impressively illuminated be quiet! ATX case with compact dimensions and high airflow for any application.

High airflow intake front panel and top cover for maximum performance
3 preinstalled Pure Wings 3 140mm PWM fans for extraordinary air pressure
Dynamic case front design with elegant ARGB lighting inside and outside of the case
Generous space for high-end graphics cards and large coolers, despite compact footprint
Optional vertical graphics card installation
Water cooling ready for radiators up to 360mm
USB 3.2 Gen. 2 Type C for best connectivity
Side panel made of tempered glass

The next generation of airflow cases from DeepCool has arrived, and they are indeed glorious. The CH360 DIGITAL is a newly designed mATX case with a concentrated focus on increased airflow throughout the entire chassis. Two bright PWM enabled 140mm ARGB fans are mounted in front of the main compartment, a hybrid side panel, and a dual status digital screen sets the CH360 DIGITAL apart from the competition.

• Offers two distinct front panels to optimize air intake or showcase your build
• The innovative quick-slide dust filter is both highly functional and aesthetically pleasing
• The removable top panel and front bracket allow for effortless assembly within the extra-large interior space
• Features a built-in RGB fan controller syncing with up to six fans
• Supports up to an E-ATX motherboard
• Accommodates graphics cards up to 390mm in length
• Supports up to nine fans, a 360mm water cooler and CPU coolers up to 190mm in height

The ASUS Prime AP201 Tempered Glass version is a stylish 33-liter MicroATX case with tool-free side panels, with support for 360 mm coolers, graphics cards up to 338 mm long, and standard ATX PSUs.
Optimized for Cooling: With support for 280 and 360mm radiators and up to six fans, the AP201 is primed to deal with the thermal onslaught of high-performance hardware.
Industry-Leading Spatial Efficiency: Despite a 33L footprint, the AP201 supports ATX PSUs up to 180 mm long, graphics cards up to 338 mm long, custom liquid cooling, and various storage devices.
Tool-Free Side Panels: A simple yet secure clip mechanism allows chassis side panels to be easily removed and resistant to accidental dislodging.
Sizeable Cable-Management: The AP201 features an extended motherboard tray with strategically placed cutouts and a 32 mm gap to tuck cables out of sight.
Front Panel USB Type-C® Support: The front panel of the AP201 features a USB 3.2 Gen 2 Type-C port, so users can enjoy transfer speeds of up to 10 Gbps.

The MATREXX 55 V3 ADD-RGB WH 3F is a performance mid-tower ATX case with dual 4mm tempered glass side and front panel to showcase your build in spectacular form featuring an A-RGB LED strip and 3 included A-RGB fans.

Featuring a glass mirror design with ARGB LED strips, this high-performance mid tower case achieves an infinity effect to deliver a truly unique and mesmerizing lighting experience. Full tempered glass side panel with a convenient hinge design allows for easy opening and closing. 

Addressable RGB fans can be controlled using one of two ways: RGB LED control button or Addressable RGB motherboard. Includes a 6-Port ARGB control hub to connect and control your ARGB fans. 

• Infinity mirror ARGB design in the front panel delivers a mesmerizing look and feel
• Includes a 6-port ARGB control hub to connect and control your Addressable RGB fans
• Full tempered glass side panel with a convenient hinge design and handle
• Fan mounts on the PSU shroud support up to two 12cm fans for superior VGA cooling
• Supports liquid cooling in the front, top, and rear of the case

Met een front- en zijpaneel van gehard glas legt de Rebel C60 RGB de focus op de hardware die binnenin is geïnstalleerd. Vier RGB-fans zijn slim geplaatst rondom de locaties voor het moederbord, geheugen, koeling en grafische kaart en zorgen voor efficiënte koeling, waarbij er ook lucht vanaf de onderkant van de behuizing naar binnen wordt gezogen. De ATX-kast is uitgerust met een bevestigingsframe en bevestigingsbeugel voor het eenvoudig plaatsen van harde schijven, SDD's en meer fans. Daarnaast zorgen moderne I/O-poorten voor uitgebreide verbindingsmogelijkheden.

Pure Base 501 Airflow White is a traditional, timeless and versatile be quiet! ATX case with compact dimensions.

High airflow intake front panel and top cover for maximum performance
2 preinstalled Pure Wings 3 140mm PWM fans for extraordinary air pressure
Generous space for high-end graphics cards and large coolers, despite compact footprint
Optional vertical graphics card installation
Water cooling ready for radiators up to 360mm
USB 3.2 Gen. 2 Type C for best connectivity
Comfortable cable management with clever cable routing design

The CORSAIR 3000D RGB AIRFLOW presents a mid-tower ATX chassis with an efficient high-airflow design, including three pre-fitted CORSAIR AR120 RGB fans that deliver outstanding cooling and vibrant lighting effects.

Fits up to 8x 120mm fans and up to 360mm radiators
Includes 3x AR120 RGB fans
High-performance airflow optimized front panel
Fits four-slot graphics cards up to 360mm in length

Pure Base 501 DX White is an impressively illuminated be quiet! ATX case with compact dimensions and high airflow for any application.

High airflow intake front panel and top cover for maximum performance
3 preinstalled Pure Wings 3 140mm PWM White fans for extraordinary air pressure
Dynamic case front design with elegant ARGB lighting inside and outside of the case
Generous space for high-end graphics cards and large coolers, despite compact footprint
Optional vertical graphics card installation
Water cooling ready for radiators up to 360mm
USB 3.2 Gen. 2 Type C for best connectivity
Side panel made of tempered glass

Experience the stunning panoramic view of Dryft. The unique design allows the full tempered glass front and side panels to provide a perfectly clear view of your hardware. Designed with a focus on elegant aesthetics, customizable RGB lighting, improved cooling, and easy cable management, Dryft is the perfect choice for gamers seeking both style and functionality.

Panoramic View: Full tempered glass front and side panels give you a completely unobstructed view of your rig’s internals.
Versatile Cooling: Supports up to 10 fans on the backplate for improved cooling performance without compromising the panoramic view.
Liquid Cooling Ready: Compatible with various liquid cooling configurations.
Pre-Installed RGB Fans: Six pre-installed fans with customizable lighting effects.
High-End Component Support: Accommodates GPU up to 419mm and CPU cooler up to 162mm.
Dual Chamber Design: Improved cable management for a clean and clutter-free interior.
Storage Options: Two SSD slots and one 3.5″ HDD drive bay.
Convenient I/O Ports: Easy access to USB 3.0, USB 2.0, and HD audio ports.
Compatibility: Supports ATX, Micro-ATX, and mini-ITX motherboards.
Easy Maintenance: Magnetic top and bottom filters for hassle-free cleaning.